Date:         Mon, 10 Oct 2005 14:13:33 -0400
Reply-To:     ROBERT DONALDS <donalds1@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         ROBERT DONALDS <donalds1@VERIZON.NET>
Subject:      Re: Water in the oil update
Comments: To: Bill Collins <wb6otg@INTREX.NET>
Content-type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original

To bad you did not find something concussive to hang your hat on.
best of luck
Bob Donalds
Boston Engine

if you feel the need to give me a call at some point please do so
1 508 358 6264


----- Original Message -----
From: "Bill Collins" <wb6otg@INTREX.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, October 10, 2005 9:05 AM
Subject: Water in the oil update


> Over the weekend, I removed the cylinders, cleaned things up, replaced all
> the cylinder o-rings, and put the engine back together.  I hesitated to
> remove the cylinders, but they really aren't hard to re-install, with the
> engine out of the van.
>
> I found that the left side pushrod tubes were longer than they should have
> been. I assume this means that the head hung up on something and didn't
> seat properly.  That would certainly explain the water in the oil!
>
> Thanks for all the advice on this problem.
>
> Bill
>