Date:         Fri, 28 Oct 2005 11:13:29 EDT
Reply-To:     THX0001@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         George Goff <THX0001@AOL.COM>
Subject:      Re: those of you who have installed a fuel line replacement kit
Comments: To: al_knoll@PACBELL.NET
Content-Type: text/plain; charset="US-ASCII"

In a message dated 10/28/05 10:41:20 AM, al_knoll@PACBELL.NET writes:

<< Spring clamps a much better solution apply a relatively constant clamping
force regardless of small changes in the diameter of the hose and tube
assembly due to age (my excuse) or low local temperature. >>

Then why is most of the system made up with lined ear clamps?  Perhaps an ear
clamp is slighty elastic once it is installed.

George

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.