Date:         Wed, 2 Nov 2005 11:20:36 -0800
Reply-To:     TC <trclark@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         TC <trclark@SHAW.CA>
Subject:      Permatex Plastic weld to create new instrument cluster tabs ??
Content-type: text/plain; charset=iso-8859-1

same old story hold down tabs on cluster busted off
some of the screen sink for the odo-meter sheared off
I have had good experinece with permatex plastic weld  but never tried
to fabricate/mold things a tiny as the hold down tabs

has any one tried it would be worth the effort
will the permatex take drilling & tapping
after building it up enuff for the screw sink for the odo

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.