Date: Tue, 1 Nov 2005 08:47:39 -0500
Reply-To: Christopher Gronski <gronski@GMAIL.COM>
Sender: Vanagon Mailing List <firstname.lastname@example.org>
From: Christopher Gronski <gronski@GMAIL.COM>
Subject: Re: removing insulation adhesive
Content-Type: text/plain; charset=ISO-8859-1
Jake I'm at the same pointg in a similar project with my 86 westy
(though I am not facing the adhesive issue... my insulation appears to
have just been placed inside. What "non water vapor" insulation are
On 11/1/05, jake beaulieu <email@example.com> wrote:
> I have removed the cabinets, refrigerator, etc from the interior of my AC 82
> Westy. This whole project started because I had a major mouse invasion
> complete with a cozy little nest built in the wall. Once I got everything
> cleaned up I just couldn't put it back together without hitting the rust
> with POR15, adding sound deadening material, and re-insulating with material
> that would not hold water vapor.
> I have removed the original insulation and am prepping the sheet metal to
> receive the sound deadening material. I am using some IceWatch stuff we
> talked about a couple of months ago. Anyway, I am finding that the adhesive
> that was used to hold the original insulation in place is very stubborn. I
> would like to get all of this off the sheet metal so the sound deadening
> material has a clean surface to adhere to. Have any of you found a good
> solvent for removing that junk?
Back to: Top of message | Previous page | Main VANAGON page
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives
The vanagon mailing list archives are copyright (c)
1994-2011, and may not be reproduced without the
express written permission of the list administrators.
Posting messages to this mailing list grants
a license to the mailing list administrators to reproduce
the message in a compilation, either printed or electronic.
All compilations will be not-for-profit, with any excess
proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively
towards the management and operation of the Vanagon mailing
list and vanagon mailing list web site.