i modified the belly pan for my 82 westy by cutting out a small section to allow access to the fuel filter. on mine the cut is at the front - before the fuel pump. on later westy that would be towards the rear - after the fuel pump. jimt On Nov 8, 2005, at 5:45 PM, Chris Renz wrote: > Would I be correct in assuming that the belly pan for the BA6 > heater on my > 81 needs to be completely removed in order to change the fuel filter? > >> From the looks of it, yes, but if you have a tip on avoiding this, >> im all > ears! > > Thanks, > chris. > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.