John Meeks-- I fixed the problem.Thanks for offering the new bleeder valve screw,but I dont need it anymore.The security of knowing that it was avaliable prompted me to go ahead with my screwectomie. The correct bolt size is M10 with a 1.0 thread pitch( for the archives). I would suggest a bolt shorter than 20mm.I would rather have this bolt cause it wont break. I think I will leave off the rear heater cover as it will give a few more cubic inches of storage space. With the bolt,I dont have to fear that shifting of cargo will break the bleeder screw. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.