Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2005, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 26 Nov 2005 23:44:04 -0500
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: Fuel Filter and Gas Tank
Comments: To: Michael Edwards <medwards1@TRIAD.RR.COM>
In-Reply-To:  <003001c5f293$624af100$ea75be41@michael1>
Content-type: text/plain; charset=us-ascii

As long as low cost tanks are available from list vendors such as Bus Depot, that is the only long term fix. Most manufacturers do not use filters before the pump. As soon as an inlet filter starts loading up, the suction pressure, (or vacuum) of the pump will quickly cause the fuel to vaporize, (yes boil) and cause fuel starvation, vapor lock, and all sorts of inconsistent running problems. The pump it self does have protection for the big stuff but some debris can pass through it. The large canister filter is there to protect the injectors. Not just from clogging, but fine abrasives will wear out the injector tips.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Michael Edwards Sent: Saturday, November 26, 2005 9:12 AM To: vanagon@GERRY.VANAGON.COM Subject: Fuel Filter and Gas Tank

I brought this thread up recently. I had my tank out at the shop (87 2WD) to repair a leak and they said I couldn't use a liner kit because the tank had a screen in it. Apparantly unlike my old type I where the screen is a replacable part, it's part of the tank in the vanagon. Have you actually used the kit and how did you deal with the screen? I have not had the opportunity to inspect the tank myself, so I'm going on what the shop said. I did notice that the canister filter is downstream from the fuel pump. This configuration seems strange to me. Seems like you would want some sort of filter between the tank and the pump to protect the pump. Has anyone tried putting one of those small in-line filters between the tank and pump? I was thinking this set up might allow you to remove the tank screen so you can use a liner without clogging the works. Thanks, Mike ------------------------------------------------------------------------ Date: Fri, 25 Nov 2005 14:20:31 -0800 From: phil cain <bearsvw2000@YAHOO.COM> Subject: Re: fuel filter and gas tank questions

Order yourself a POR-15 gas tank kit http://por15store.com/ and use this site to do the tank http://www.ratwell.com/technical/FuelTankRestoration.html and have a nice day doing it, it takes about three to four days to do it right. Phil


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.