Date:         Thu, 1 Dec 2005 11:11:07 -0800
Reply-To:     TC <trclark@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         TC <trclark@SHAW.CA>
Subject:      flow rate spec on factory new Bosch Fuel injectors ?
Content-type: text/plain; charset=iso-8859-1

Hi
I just bought a spare set of FI's off thesameba.com a very good deal (4 for
$50)
I sent them off to http://www.cruzinperformance for cleaning
Rich then sent back a nice b4 and after charts

http://www.cruzinperformance.com/injcleaned/index.php?action=showinjdata&id=
2010&l_name=clark&injserial=511261-511264

(looks like these were in quite good shape flow wise b4 cleaning as well)

does any one know what the factory rated specs are for brand new FI's ?

rich says it is best to *NOT* use FI cleaners but just pull em & send for
cleaning
rather than send all the crud that comes off the FI's with in car cleaning
any opinion on this ?

having a spare set makes it real easy eitherway :)

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.