Date: Sun, 11 Dec 2005 21:55:14 -0600
Reply-To: Jim Felder <felder@KNOLOGY.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jim Felder <felder@KNOLOGY.NET>
Subject: Re: Help! Need VW diesel shop in San Francisco
In-Reply-To: <Pine.LNX.4.58.0512111929400.13897@kenneke.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed
Why don't you first try tightening the belt against the drive gear?
It's done using the tensioner, an eccentric cam around which is placed
a pulley that bears on the belt. Tightening the cam will engage the
belt more with the intermediate shaft, and therefore the vacuum gauge
and the oil pump.
The stud that mounts the tensioner and its locknut comes out of the
head. The nut itself is 15 mm. Once loosened, you will need to somehow
get two pins into the holes in the eccentric cam. A Park Bicycle
headset (old style) wrench or old style bottom bracket wrench will do,
as will the purpose-made VW tool or a pair of bent long-nose pliers
with small tips. The idea is to get two pins into the two holes in the
cam with enough leverage to rotate the cam to tighten the belt.
Conventional wisdom says to tighten the belt so that it can just be
turned 45 degrees. However, a better measure is to tighten it so that
the belt can barely be moved over the top (valve or fuel injection)
pulleys with the fingers grabbing it.
This should do it for you if you don't have something like a seized
intermediate shaft.
Jim
On Dec 11, 2005, at 9:32 PM, jon wrote:
> I'll start with the need: I need to find a VW diesel shop in SF, or
> someone that has tools and space I can use to repair my diesel Vanagon.
> And, now, the "rest of the story" (Keep in mind this van has a 1.9NA VW
> *diesel* engine)
>
> After several years of reliable operation, the SlugBus had some
> problems
> today. As we left San Francisco, headed North on HWY 1, the oil
> pressure
> light came on. We coasted to the bottom of the hill, and immediately
> shut
> off the engine. When the oil pressure light came on, we also lost
> vacuum
> assist. That screams to me the intermediate shaft is not rotating.
> After
> trying to avoid that reality, and checking alternator and water pump, I
> proceeded with troubleshooting: I pulled the timing belt cover, and
> had my
> wife turn over the car to verify no shaft rotation. The timing belt is
> still fine, and did not jump any teeth. But, the belt is not turning
> the
> intermediate shaft pulley. ;-( That means no vacuum...and no oil
> pressure.
>
> I have none of my diesel tools with me. So, can someone recommend a
> good
> VW diesel shop in San Francisco? Our van is parked in The Presidio. I
> am
> trying to get home to Albany, OR.
>
> Thank you,
>
> Jon....Stranded in San Francisco with my 1983 Diesel Vanagon...the
> "Slugbus"
> Cell #: (541) 619-6490
>
|