> Is this difficult to take out? Never done it. Nothing in the archives > about it. Just one entry asking for torque specs on the plug.Looks ez in > the Bentley, but the access looks bad cause of the pushrod tube.
I took mine out with just a cheap metric allen wrench from a set I bought at a FLAPS. Might be hard to get a regular stubby 3/8 drive hex socket in there, but a long one or the aforementioned L-shaped hex key fits through there easy. -- John Bange '90 Vanagon - "Geldsauger" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.