Date:         Fri, 9 Dec 2005 21:26:00 +0000
Reply-To:     joe trussell <vanagongl@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         joe trussell <vanagongl@HOTMAIL.COM>
Subject:      Re: spacer dimensions in saggy butt story
Comments: To: trclark@SHAW.CA
In-Reply-To:  <05dc01c5fcdd$0bc06fa0$c901a8c0@w2ktopcat>
Content-Type: text/plain; format=flowed

Unfortunately I can't answer the question, but my solution to the saggy butt
issue was as follows:

I bought used springs from a '90 Westy for $45.  Put them on all four
corners and, lo and behold, had saggy butt syndrome still, albeit with lower
clearance.

I put the old original saggy butt springs back in the rear, and magically,
it's levelled out and rides very well (with Boges in front and Alkos in
back.)  It sits about 1 1/4 inches lower, and fits in my garage but does
leave paint streaks on my skylight.

I can see where the spacer method would be much simpler, though.

Joe T.

>From: TC <trclark@SHAW.CA>
>Reply-To: TC <trclark@SHAW.CA>
>To: vanagon@GERRY.VANAGON.COM
>Subject: spacer dimensions in saggy butt story
>Date: Fri, 9 Dec 2005 08:24:36 -0800
>
>http://www.knology.net/~vw/vanagon/sag/
>
>does any body know the actual dimensions
>for the spacers
>the diameter for the spacer
>the diameter  of the hole ?
>think i might get some fabricated local in
>steel or aluminumn

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/