Date:         Sat, 10 Dec 2005 18:10:00 -0800
Reply-To:     Rob <becida@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rob <becida@COMCAST.NET>
Subject:      Re: that little light behind the heater controls
Comments: To: Jim Felder <felder@KNOLOGY.NET>
In-Reply-To:  <ca9cb4483e218fbdfb1f503a0f0ae3cd@knology.net>
Content-Type: text/plain; charset="us-ascii"; format=flowed

It sounds like you have to pry the plate off.

Rob

At  12/10/2005 05:58 PM, Jim Felder wrote:
>I've done this on a couple of vanagons. Take the burn out bulb into a
>flaps and get a duplicate or close to it. I got an exact match. If one
>flaps won't help, go to another. If you get stuck, email me and I will
>get extra bulbs when I go back as one van needs another now.
>
>Don't worry about the socked and broken clip, they're all that way.
>Solder the wires, tape/insulate where needed and affix with a dab of
>silicon adhesive so you can pop it back off when it blows again.
>
>Jim
>
>On Dec 10, 2005, at 7:26 PM, TC wrote:
>
>>so the useless dealer tell me the
>>single unit fixture that is both the light & the plastic holder is no
>>longer
>>available