Date:         Mon, 12 Dec 2005 10:39:50 -0500
Reply-To:     Christopher Gronski <gronski@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Christopher Gronski <gronski@GMAIL.COM>
Subject:      Re: Tri-Star or 16" Fender flares was Re: " plastic wheel arch
              extensions"
Comments: To: "JordanVw@aol.com" <JordanVw@aol.com>
In-Reply-To:  <9a.334eefb4.30cef2aa@aol.com>
Content-Type: text/plain; charset=ISO-8859-1

We'd need to get our hands on some tri-star flares in good condition,
David Marshall has indicated these are NLA new...

Chris

On 12/12/05, JordanVw@aol.com <JordanVw@aol.com> wrote:
> In a message dated 12/12/05 10:28:23 AM Eastern Standard Time,
> gronski@gmail.com writes:
>
>
>
> That's what credit cards are for. I'm in discussions with David
> Marshall and John Rodgers right now to see if we can make this happen.
>
> Chris
>
> On 12/12/05, JordanVw@aol.com <JordanVw@aol.com> wrote:
> > I am all for this..  so chris, do u have a spare grand laying around you
> can
> > buy the OEM set with?  :<)
> >
>
>
> id be into this is you dont have to cut the metal wheel well of the vanagon
> to install them like you had said was needed to do to install the 16"
> flares..    what about the 14" Tri-Star flares???  can we repro those?   i
> really dont want to cut any sheetmetal to install them.. drilling holes is
> bad enough, but i dont mind drilling holes..
>
>
> chris