Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2005, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Sun, 18 Dec 2005 15:26:02 -0800
Reply-To:   al sinclair <alvanagon@GMAIL.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   al sinclair <alvanagon@GMAIL.COM>
Subject:   Re: replaced tranny but no move. What next?
In-Reply-To:   <43A5CC6E.9070304@verizon.net>
Content-Type:   text/plain; charset=ISO-8859-1

as far as I know it was in ok -- the torque converter was wired in place so it couldn't slip out. If it was out, then the tranny wouldn't fit in would it? I'm guessing that if the shaft was not seated then the torque converter would be out of position and the tranny housing wouldn't mate with the engine.

On 12/18/05, Mike Collum <collum@verizon.net> wrote: > > Was the long shaft that turns the pump put back in and properly seated? > > Mike > > > al sinclair wrote: > > My first big job VW has come to grief -- is there hope? > > > > After far too many days of painfully inexperienced labor I've finally > > replaced the badly-leaking auto tranny in our '81 vanagon with a > purchased > > used-believed-good one. Engine fired up fine, shifted into gear but > nothing > > at all happened. Not a trace of movement. (The van _was_ on the ground > > again, with the wheels unblocked and the brake off.) > > > > It's a huge disappointment: hair-tearing time, planned Xmas jaunt down > the > > tubes, all that time plus money on tools wasted, elimination of > confidence > > in being able to own a westie, etc. > > > > I've rechecked the fluid level, TC bolts, gear & throttle linkage, axle > > bolts. Everything looks in order. Anyone got suggestions? > > > > I guess the next step is to buy a rebuilt auto tranny, or maybe rebuild > the > > one that I took out, have it put in by someone who knows what they're > doing, > > and move on (tho today I feel like junking the beast, teach it a lesson) > but > > if there is any hope, anything I might have overlooked, any hidden knobs > on > > the tranny that might bear twiddling please tell me. > > > > Al > > aka Aaarrgghh today :-( > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.