For lug nut/bolt removal, I use a 1/2 inch breaker bar and a 19mm 6 sided socket along with a 3 foot cheater pipe. Works every time. Mike
Sudhir Desai wrote: > The only thing I haven't tried is a small propane torch on the nut of > the rears and the wheel/hub of the fronts. > > Any and all thoughts would be helpful. > > btw, I have a 1/2" Ingersoll Rand impact gun running 140psi, and have > used it with gunk-off or whatever that stuff is called to no avail. > > any and all thoughts are appreciated. > sudhir > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.