Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2005, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 16 Dec 2005 17:43:59 -0800
Reply-To:     Robert Fisher <refisher@MCHSI.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Fisher <refisher@MCHSI.COM>
Subject:      Re: Replacing fuel lines with Copper tubing/Steel braided lines?
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=response

I remember an old Ford we had when I was a kid that had metal fuel lines in the engine compartment. It would be hard to impossible to start sometimes after it got up to full temp. A mechanic friend said it was getting vapor lock due to the metal fuel lines and replaced them with plain 'ol rubber. The problem went away never to return.

Another thing that comes to mind is a report I saw some time ago on Astro/Safaris that had caught on fire. There was a metal joint/fitting in the otherwise rubber fuel lines under the chassis near the exhaust pipe that was exposed and therefore subject to debris damage and corrosion. They were blaming the fires on leaks in the metal spraying fuel on the exhaust pipe.

Just a couple more things to consider.

Cya, Robert

----- Original Message ----- From: "John Rodgers" <inua@CHARTER.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, December 16, 2005 3:22 PM Subject: Re: Replacing fuel lines with Copper tubing/Steel braided lines?

>I suspect that the copper lines would be subject to cracking at some > point, due to vibration. The braided lines, however, are another matter. > This type of line is used for both hydraulics and for fuel on aircraft. > It is tough, and handles vibation well. > > John Rodgers > 88 GL Driver > > obertmstewart wrote: > >>So a friend in Los Angeles California told of two Vanagon owners who have >>replaced their fuel lines with Copper tubing, anyone else ever here of >>this? >> >>I also wondered about using steel braided lines? >> >>Any idea what will last longer? Be more cost effective in he the long run? >> >>Your thoughts? >> >>-- >>Rob >>NYC/Long Beach, NY >>88 Wolfsburg, Silver >> >> >> >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.