Date:         Fri, 16 Dec 2005 16:21:17 -0600
Reply-To:     Jim Felder <felder@KNOLOGY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Felder <felder@KNOLOGY.NET>
Subject:      Re: Bleeding Coolant on a 2.1L syncro
Comments: To: Sudhir Desai <sudhir.desai@GMAIL.COM>
In-Reply-To:  <5c80974c0512161409h1fa47faby86e5040079a370f7@mail.gmail.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed

Take a 10mm wrench with you for when you find out that 8mm doesn't
fit...

: )

Jim

On Dec 16, 2005, at 4:09 PM, Sudhir Desai wrote:

> chris, easiest way to bleed the coolant is to park the van on an
> uphill, remove the upper grill, and use an 8mm wrench to open  and
> close the small bleeder bolt on the left hand side of the top of the
> radiator. :)
>
> sudhir
>

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.