Date:         Mon, 19 Dec 2005 20:49:21 -0500
Reply-To:     Sudhir Desai <sudhir.desai@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Sudhir Desai <sudhir.desai@GMAIL.COM>
Subject:      Re: Ignition Switch Source & Tips
Comments: To: Tom Salicos <Tom@salicos.com>
In-Reply-To:  <004901c60504$aa505fc0$6500a8c0@omar>
Content-Type: text/plain; charset=ISO-8859-1

Maybe the issue is the same then.  ie: the starter is spinning before
it completely extends.

just my thoughs.
sudhir


On 12/19/05, Tom Salicos <Tom@salicos.com> wrote:
> ----- Original Message -----
> From: "John Carpenter" <Trvlr2001@AOL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Monday, December 19, 2005 3:52 PM
> Subject: Re: Ignition Switch Source & Tips
>
>
> > In a message dated 12/19/2005 9:08:02 A.M. Pacific Standard Time,
> > Tom@SALICOS.COM writes:
> >
> > Last  weekend I replaced the starter on my '87 Syncro because of
> > occasional
> > grinding  sound and no start.  Still have the problem.
> >
> > I thought I'd  try an ignition switch next.  What is a good brand, source,
> > and are there  any special tips for a DIY'er?
> >
> > Thanks
> >
> > Tom Salicos
> > '87 Syncro  Westy EG-33
> >
> >
> > Tom,
> > New bushing as well?
> > JC...
>
>
> Thanks for responding, John.
>
> The starter I took out had 1000 miles on it.  It was a remanufactured
> (rebuilt?) Bosch.  I lubed the bushing but did not replace it as it was
> pretty new.   Put the same make of starter back in.
>
> The "grinding" sound is like when you hit the starter and it is already
> running.  It doesn't do it all the time.  I don't know how you can
> mis-install a starter.  And I don't see two starters in a row doing the same
> thing.
>
> I'll be inspecting the ring gear tonite.
>
> Tom
>