Date:         Thu, 15 Dec 2005 11:07:09 -0800
Reply-To:     Jeffrey Schwaia <jeff@VANAGONPARTS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeffrey Schwaia <jeff@VANAGONPARTS.COM>
Subject:      Re: Projektzwo  foglight kit, wheel archs, etc.  reproductions
Comments: To: Kim Brennan <kimbrennan@MAC.COM>
In-Reply-To:  <f1220f6527faf789215d25231371b82a@mac.com>
Content-Type: text/plain; charset="us-ascii"

No problem getting those lenses as they are not unique to the Projektzwo fog
lights.  If enough people need spares, I can order them from one of my
vendors in Germany (not sure about price).

Cheers,

Jeff
www.vanagonparts.com


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
Of Kim Brennan
Sent: Thursday, December 15, 2005 9:19 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Projektzwo foglight kit, wheel archs, etc. reproductions


I'm less concerned with the PLASTIC part of the Projektzwo's, than the
lens part. I've not found a second source for those.


On Dec 15, 2005, at 12:12 PM, John Rodgers wrote:

> Well, I tried to buy the kits from Ken to have examples to reproduce on
> my vacuum former machine, but I missed. I was just a few minutes two
> late.
>
> So, what to do next??
>
> Fact is, without examples, I cannot determine what can be made on the
> machine, Projektzwo foglights, wheel arches, or whatever, much less
> actually reproduce them.
>
> So, if any one has either  these two, or any other item that they think
> may make a nice reprocuction for the vanagons, and are willing to part
> with it for a little while, drop me a note to arrange to get it to me.
> Be assured it will be returned  in good condition,
>
> I have looked at a lot of pictures of SA grills, Projektzwo foglight
> kits, double fog-light lower grills, and wheel arches, and they all
> look
> to be reproducible by vacuum forming.However, I have never seen any of
> these first hand, so I am at a disadvantage in making  a final
> determination. And of course, if I don't have one in hand I can do
> nothing in the way of reproduction.
>
> If anyone has an interest, let me know.
>
> Regards,
>
> John Rodgers
> 88 GL Driver