Date:         Thu, 15 Dec 2005 08:12:35 -0500
Reply-To:     Christopher Gronski <gronski@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Christopher Gronski <gronski@GMAIL.COM>
Subject:      Re: [vanagon] Missed out on the NLA Projektzwo fog lamps? Buy
              this ultra rare...
Comments: To: "JordanVw@aol.com" <JordanVw@aol.com>
Comments: cc: Adventurewagen@yahoogroups.com, Syncro@yahoogroups.com,
          vanagon@yahoogroups.com, wetwesties@yahoogroups.com
In-Reply-To:  <252.32cfbcb.30d243ef@aol.com>
Content-Type: text/plain; charset=ISO-8859-1

"where do the holes have to be drilled? inboard of the signal lights?":

Chris the grille has eight holes which I assume are used to attach it.
four of them (two each side) go, as you've indicated, inboard of the
signal lights. The last two are at the bottom basically where the
lights end and the lovers begin. I haven't even test fir this so I
can't say for sure.

Chris

On 12/14/05, JordanVw@aol.com <JordanVw@aol.com> wrote:
> In a message dated 12/14/05 10:33:11 PM Eastern Standard Time,
> gronski@gmail.com writes:
>
>
> Please excuse the cross post, but I am offering what I consider to be
> the rarest vanagon part ever on eBay, and believe me I have hunted
> down some rare parts.
>
> It was originally on a David Marshall's DOKA Tristar syncro but he
> removed it in favor of a full width lower grille. I bought the item
> from the David, but never got around to installing it.  I just bought
> some Projektzwo fog lamps (also a rare no longer available part) and
> since I cannot use both I am just trying to offset my costs a bit.
>
> The item number is 8022858773 on eBay motors. Here is the link:
> http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8022858773
>
> Thanks,
> Chris
>
>
> that it pretty cool...its definatly made for the vanagon, i wonder what
> company made it..   those screw holes can be fixed with Devcon plastic
> welder...ive used that stuff to fix grilles, it works great..  where do the
> holes have to be drilled? inboard of the signal lights?
>
> chris