Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2005, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 17 Dec 2005 15:25:37 -0500
Reply-To:     Christopher Gronski <gronski@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Christopher Gronski <gronski@GMAIL.COM>
Subject:      Re: Battery Light
Comments: To: mark drillock <drillock@earthlink.net>
In-Reply-To:  <43A46190.9020004@earthlink.net>
Content-Type: text/plain; charset=ISO-8859-1

Just to clarify it is a stock 1986 2.1L syncro (well OK the ENGINE is stock).

I had another look at the wires. The "tan" or "white" or whatever color wire it is definately goes to the power steering pump. It obviously goes to a plastic connector that connects to a spade on the back of the power steering pump. Which actually brings up another problem. The wired is broken off right at the connector are these things available? Or should I just replace it with a conventional spade connector... will a conventional spade connector fit?

Now for the blue wire, its pretty light gauge and I still can't figure out where it attaches to the alternator.

Thanks for everyone's help so far...

Chris

On 12/17/05, mark drillock <drillock@earthlink.net> wrote: > Sure, but the last I heard Chris has a Syncro. Those are 2.1. Maybe he > can tell us what year he is working, as everyone always should when they > post about technical issues. > > Mark > > Mike Collum wrote: > > > On my '85 1.9 (Digijet)... one of the wires from the pressure switch on > > the power steering pump goes to ground and is attached to one of the > > "Through" bolts on the alternator. > > > > Mike > > > > > > mark drillock wrote: > > > >> Don't connect either PS switch lead to ground. That is not how it works, > >> at least not on 2.1 models. Doing that could short out the power lead > >> from the ECU relay. The way the PS switch works is it has one lead that > >> gets power from the ECU relay whenever the key is on and the other lead > >> sends a signal to the ICU relay. Neither lead is ground. There is no tan > >> or brown wire to the PS switch in any case. They may look tan from dirt > >> and age but early years had 2 white wires while later years had wires > >> with stripes. > >> > >> Mark > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.