>Can anyone provide some simple instructions for replacing the >ignition swich on an 84 Vanagon? follow the link below..
At 9:32 AM -0700 8/25/05, John Bange wrote: >7b0783000099f9 > >> > Check out my how to here: > > > http://www.vanagain.com/how2ign.htm >> hmm I just got hold of a friends Bentley manual and those directions >> are not the same at all ??? >> the lock cylinder must be drilled out with a hold 1/8 " drill >> 12mm down from the top of the lock cylinder >> 10mm in from the side of the raised ridge on the lock cylinder >> > >The "drill n' poke" instructions in the Bentley are for removing the >ignition cylinder from the switch assembly. Ken's instructions at the >link above are for removing the switch assembly from the steering >column. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.