Date:         Wed, 28 Dec 2005 16:59:02 -0500
Reply-To:     Paul Guzyk <paullist@GUZYK.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Paul Guzyk <paullist@GUZYK.COM>
Subject:      Re: Need instructions for replacing ignition swich on 84 Vanagon
In-Reply-To:  <000a01c60bec$dbfe47a0$6501a8c0@mchsi.com>
Content-Type: text/plain; charset="us-ascii" ; format="flowed"

>Can anyone provide some simple instructions for replacing the
>ignition swich on an 84 Vanagon?

follow the link below..


At 9:32 AM -0700 8/25/05, John Bange wrote:
>7b0783000099f9
>
>>  > Check out my how to here:
>  > > http://www.vanagain.com/how2ign.htm
>>  hmm I just got hold of a friends Bentley manual and those directions
>>  are not the same at all ???
>>  the lock cylinder must be drilled out with a hold 1/8 " drill
>>  12mm down from the top of the lock cylinder
>>  10mm in from the side of the raised ridge on the lock cylinder
>>
>
>The "drill n' poke" instructions in the Bentley are for removing the
>ignition cylinder from the switch assembly. Ken's instructions at the
>link above are for removing the switch assembly from the steering
>column.