Please do!!! Pictures are worth their weight in gold. I'm contemplating installing a tank on my non-tanked GL, and these would be a big help!! TIA! Regards, John Rodgers 88 GL Driver Brian Tipsword wrote: >Hello! > > I am kinda poking around for interest in this subject. I just pulled out my interior and flooring to find out all there is to know about the floor of the van. > > It appears that the LP tank utilizes only two of the threaded holes in the floor. To dispell conjecture, I took a look at a crusty Ol' hacked up Westy at the local bone yard and the threaded studs are acutally through bolts from the top. > > So, tomorrow I head to Cascade Nut & Bolt and buy myself four grade eight 10mm x 1.5 pitch bolts (approx 2" extending below the floor line) ~ 6 nuts (4 nylocks - 2 non) four large hardened flat washers and a small tube of sealant. > > If anyone wants, I will post pics of my install complete with specs on the hardware I actually end up with (the tank is sparklin' new from GoWesty). > > If this isn't of interest I won't break out the digital camera and will jus' do this :-) > > What say the masses? > Brian > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.