Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2006, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 6 Jan 2006 23:33:17 -0500
Reply-To:     robertmstewart <robertmstewart@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         robertmstewart <robertmstewart@MAC.COM>
Subject:      Re: Question - RE: Vanagon Seams & Sealing them up for good...
Comments: To: JM060356@aol.com
In-Reply-To:  <24.7f9b3014.30f09a34@aol.com>
Content-Type: text/plain; charset="ISO-8859-1"

> Hey Jim, > > Unfortunately I do not have a lift to see what¹s going under there, was > thinking of getting a mechanics undercarriage rolling sled to get underneath. > Any way, I found these two products from POR15, > > POR Makes a new material for this type of job, your thoughts: http://www.por15.com/PRODUCTS/PUTTYFILLERSSEALERS/STRAIGHTLINEBODYFILLER/tab id/84/Default.aspx

> http://www.por15.com/PRODUCTS/PRIMERPAINTSCOATINGS/POR15RUSTPREVENTIVEPAINT/PO > RPATCH/tabid/185/Default.aspx > > One is body filler the other is patch for large rust areas whey say is as > strong as steel. I was thinking of using this stuff. I also thought where I > could I should get behind the lower panels near the wheels and sand it out and > cover with the pour material like you suggested. > > Rob > ---------- > > > About the seams... I was doing some work on mine and i found that it would > seem that > the wheel well seams and on the under side go bad long before it is noticed on > the outside. > I put the van on stands and removed the tires for a better view and found even > more rot. hope fully i got it all and rivited new metal in place using > fiberglass mixed gell then por-15 after curing. > > My 2 cents > > Jim Morgan 86GL 'breadbox" >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.