Date:         Wed, 4 Jan 2006 20:18:48 -0600
Reply-To:     Raceingcajun <raceingcajun47@BELLSOUTH.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Raceingcajun <raceingcajun47@BELLSOUTH.NET>
Subject:      Re: Failed Crankshaft seal yet again
Comments: To: David Shepherdson <shepherdsond@METRO.DST.OR.US>
Content-Type: text/plain; charset="iso-8859-1"

David

    Just for S&G, while you have the flywheel off, place the seal on the
flywheel. You want to make sure that there is tension on the spring inside
the lip of the seal while in place. I know this is pretty far fetched, but
you have a pretty far fetched problem. You never know, someone may have
machined the sealing surface or who knows.

Howard

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.