You have to get that clip inside it open and then a lead hammer or other heavy soft type mallet will usually knock it off. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jeffrey Vickers Sent: Saturday, January 14, 2006 10:33 PM To: vanagon@GERRY.VANAGON.COM Subject: Syncro CV question Is there any way to remove the axle shaft from the hub on the front of a Syncro without that universal puller tool on page 40.18 in the Bentley? I've got the inner CV off and the A-arm off the ball joint and whacking it is probably not the answer...
Jeff / 87 Syncro Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.