Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (January 2006, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 16 Jan 2006 13:32:55 -0500
Reply-To:     jake beaulieu <jbeaulie@ND.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         jake beaulieu <jbeaulie@ND.EDU>
Subject:      Re: Rust protection...
Comments: To: Trvlr2001@AOL.COM
In-Reply-To:  <288.42d8c82.30fd3ac3@aol.com>
Content-Type: text/plain; charset="us-ascii"

Howdy,

I just finished up this project in my Vanagon. I went with POR-15 products. None of seam rust in the interior was very advanced, so I didn't use seam filler material. I just cleaned up the rust with a metal brush and wire wheel, treated everything with POR-15 Marine Clean and Metal Ready, then hit it with the POR-15 paint. I am pretty impressed with the strength of the POR-15, the finish seems hard as a rock. I also used a heat gun to drive out any residual moisture from the seams before painting them.

I can't speak to the effectiveness of POR15 vs rust bullet, but I don't think you can go wrong. We are going a long ways toward extending the life of our beloved vans by taking on this project.

Now, are you going to install sound deadening material while you are in there? What kind of insulation are you going to put in? You might as well replace that old dingy wall liner material while you have it out. Hey, as long as the fridge is out you might as well clean it up, install some extra fans and replace the thermal mastic material. Wouldn't this be a great time to install that hard wood floor and reupholster the bench seat! And on and on....

Good luck, Jake

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of John Carpenter Sent: Monday, January 16, 2006 1:07 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Rust protection...

In a message dated 1/16/2006 9:54:44 A.M. Pacific Standard Time, jjolson@GWTC.NET writes:

I looked at all the posts in the archives concerned with insulating the body of the vanagon. I want to "paint" the interior body as the first layer to protect the painted sheet metal from rust, or developing more rust. Does anyone have a preference for this?

I came up with rust bullet - www.rustbullet.com - as what on first read, seems the best way to go. Opinions?

Jeff Olson Martin, SD

Hi Jeff, Just painted the interior in my 85 Westy. & I think this would apply to any style bus. & it concerns the lower body panel seam rust problem. After spraying anti rust solution & letting it soak in. Then wiping the surface clean, I bought a tube of 3M seam sealer. The kind that dry's pretty hard & solid. I applied it heavily along the floor of this panel, In the corner of the channel between the sheet metal & the interior. And, on an angle, to promote "run off" of any moisture that may ever collect there. I also ran it up the sides a bit. I then primer over the top of it. Seam rust..... goooo awwayyy !!! Just food fer thought, YMMV :o) John C. SLC, UT... Just a thought


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.