Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (January 2006, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Thu, 19 Jan 2006 16:55:53 +0000
Reply-To:   Florian Speier <groups.florian@GMAIL.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Florian Speier <groups.florian@GMAIL.COM>
Subject:   Re: Gauges - H2O Tank
Comments:   To: "Josh, Courtney & Althea Wilson" <thosewilsons@gmail.com>
In-Reply-To:   <2b14d3bf0601190827y6da86b13rab82074c45039120@mail.gmail.com>
Content-Type:   text/plain; charset=ISO-8859-1

ok, so as i understand the original watertank is still in place. this means you can still connect to the electrical connectors on the tank. so you just need to rewire and need a new display. if you can obtain an original led element you can mount it to the water tank cabinet. if you cannot get that element buy anything like it that holds the three or 4 lamps or led's you need. the only thing you need to do is select lamps that work with the voltage you will use, which is 12v if you take the car battery or anything less, maybe 3 or 4.5v if you use a mini battery pack. then run the following wires: lowest watertank connector to a switch, from there on to powersource, from there to each lamp from each lamp to one of the higher connectors of the watertank.

the idea is that the water in the tank closes the electrical curcuit between the connectors and therefor the lights light up, the higher the water level, the more lights light up.

florian

On 1/19/06, Josh, Courtney & Althea Wilson <thosewilsons@gmail.com> wrote: > > Well, the original unit was taken out completely and replaced with new > cabinets. The fridge and stove were moved to an island. So the LEDs are > gone, and I believe the wiring is gone as well. Any ideas? > > On 1/19/06, Florian Speier <groups.florian@gmail.com > wrote: > > > > > > > > On 1/19/06, Josh, Courtney & Althea Wilson <thosewilsons@gmail.com> > > wrote: > > > > > > My Westy has had the sink, stove and fridge units replaced, and with > > > it went > > > the water tank gauge. > > > > > > > > > > hmmmm what do you mean the water gauge went? the original water > > gauge consists simply of four holes in the tank, electrically speaking a > > minus at the bottom and 4 positive terminals at the top. so these three > > circuits are connected to an led each under the stove. very simple to repair > > or rewire if broken..... propably just a matter of rewiring? > > > > florian > > > > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.