Date:         Sat, 21 Jan 2006 20:08:12 -0500
Reply-To:     Christopher Gronski <gronski@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Christopher Gronski <gronski@GMAIL.COM>
Subject:      Re: Source for black window seals w/o moulding groove
Comments: To: mwstebbins@yahoo.com
In-Reply-To:  <20060121221057.67264.qmail@web30212.mail.mud.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1

Malcolm you are 100% right. However once was on a VERY rusty junkyard
parts van, and once was before my repaint so I did not have to be too
gentle.

Chris

On 1/21/06, Malcolm Stebbins <mwstebbins@yahoo.com> wrote:
> --- Christopher Gronski <gronski@GMAIL.COM> wrote:
> > Basically you just work a couple of screwdrivers
> > around the inside seal, folding it back as you go.
>
> While I agree with the technique, I'd suggest using either plastic or wood spatula in place of the
> metal screwdriver.  Don't want to scratch the paint up under the mounding, as by the time you see
> the rust, it's nearly too late to fix it.  M
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>