When I bought my 85 westy the end link on one side was missing. I have since found out that end link failure on early vanagons is common.I have seen many damaged or missing end links,since. Those end links are about $60, and dummy me bought a post 85 end link used from go westy for $40 to replace it.Course it didnt fit ,and I sent it back.You can get one at a junkyard for $5.They are called "dog leg" end links,and are cast iorn.Even the threads are cast iorn, and this is where they break. The late vanagon end links are called straight end links.They are regular steel. You can use a sway bar from a post 85 vanagon which is 19mm diameter as opposed to the 21mm, you got.Only the 4 bushings need replacing to accomodate this.I think there will be less stressing of the end links this way. Also, an early 21mm sway bar can be fitted into a post 85 vanagon by using a early vanagon sway bar and 4 larger bushings. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.