Date:         Tue, 24 Jan 2006 19:10:20 -0500
Reply-To:     rsf <feller@CARBONCOW.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         rsf <feller@CARBONCOW.COM>
Subject:      Re: low temp gauge reading need ideas...
Comments: To: Roger Sisler <rogersisler2000@YAHOO.COM>
In-Reply-To:  <vanagon%2006012418305535@GERRY.VANAGON.COM>
Content-Type: text/plain; charset="us-ascii"

Roger,

Thanks for the input. I was told when they fail the gauge usually goes hot
and not cold and usually cause both gauges to fail to. Sounds like my issue
may be with the sender unit as it's OHM readings were not in spec.

Thanks again.
Shawn

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Roger Sisler
Sent: Tuesday, January 24, 2006 6:25 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: low temp gauge reading need ideas...

Also,there is a voltage stabilizer that affects the tempature gage. This is
on the rear of the insturment cluster.Looks like a transister with 3
prongs, and a screw.Right behind the tachometer.This also affects the gas
gauge,but I think it can affect the temp gauge seperately.