Date:         Fri, 27 Jan 2006 14:49:13 -0500
Reply-To:     Wesley Pegden <wes@CS.UCHICAGO.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Wesley Pegden <wes@CS.UCHICAGO.EDU>
Subject:      Re: recap (still not fixed) Re: Update (not fixed...) Re: FIXED?
              (and, advice needed...)
Comments: To: Geo & Kathleen Hahn <ahwahnee@CYBERTRAILS.COM>
In-Reply-To:  <43DA4B72.8010208@cybertrails.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Yes, I did go ahead and replace the starter bushing.  It didn't help...
although I would still recommend doing it.  Mine had practically
disintegrated.
-Wes

Geo & Kathleen Hahn wrote:
> Wesley Pegden wrote:
>
>> The van is a manual 1.9l.  My next try is the ignition switch... I'll
>> have a new one here tomorrow I'm going to try to put in.  If that
>> doesn't work, I'm out of ideas.
>
>
> I have a similar problem, also a 1.9 '84, but seem to be letting Wes do
> all the heavy lifting so I can copy his fix.
>
> My bet is that it is not the switch.  FWIW, I already have the usual
> Bosch relay arrangement to address the 'hot start' problem.  Have you
> replaced that bearing that the armature pops into?  That's my intent
> while the engine is out anyway.
>
> Geo Hahn
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.371 / Virus Database: 267.14.21/236 - Release Date:
> 1/20/2006
>