In a message dated 2/6/06 6:28:24 PM Eastern Standard Time, dkspence@TELUS.NET writes:
> Just guessing Chris, but if the heater blows hot then hot water is > getting to the front of the van. If the rad is cold and in/out pipes > are cold maybe you have a clogged rad hence no circulation through > the rad. Dunno. Heater and rad are separate circuits right? Does > the thermostat only close the rad circuit? if so it's probably the > thermostat. If not clogged rad. Just thinking out loud here See > Bens place www.bensplace.com/cooling_system_flow.htm > > > > > prolly t-stat since rad is new and i had same prob before rad replacement |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.