In a message dated 2/11/06 2:50:38 PM Eastern Standard Time, rgolen@UMASSD.EDU writes:
> > I just purchased a passenger side jump seat for my 87 Westfalia. I have > all of the mounting hardware, except the two "cups" on the floor that the > seat frame slide into. > > Mounting the seat into my Westy looks fairly straight forward, except the > little "cups" on the floor. I looked at the floor of the Weekender that > the seat came from, and the "cups" are welded to the floor. > > Does any one have any suggestions or advice as to what I can do to the > floor to create the "cups" for the seat frame? Or, better yet, anyone have > a URL explaining how to upgrade a Westy to a jump seat? > > ric, there is tons of info on this in the archives, including a nice big flame thread incited by yours truly, over the need for those "cups".. but it's all there for the reading.. chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.