Date:         Fri, 10 Feb 2006 11:11:35 -0500
Reply-To:     Roger Sisler <rogersisler2000@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roger Sisler <rogersisler2000@YAHOO.COM>
Subject:      Re: Windshield Leaks

Another solution occured to me. Perhaps the installers put the new gasket
in upside down. I think the gasket has a slight taper towards the top.If it
is installed upside down, the taper will be towards the bottom.Just a
slight taper it is.This mistake can happen. Maybe check for molding marks
at the center of the gasket. See if they are at the top or bottom. Then
compare this with any other or the vanagons in your gorcery store parking
lot.Better not install a new chrome locking strip, or you will want a new
one in all your windows.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.