Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2006, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 19 Feb 2006 00:33:29 -0500
Reply-To:     Westy Man <syncrowestytd@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Westy Man <syncrowestytd@MINDSPRING.COM>
Subject:      Re: Diesel ring and pinion changes with a 2.1L gas engine

But, don't forget the need to change other ratios, the step up to a .77 and especially a .70 necessitates raising the second gear ratio as well.

Karl

On Fri, 17 Feb 2006 06:32:12 -0500, John Reddick <SVYOLO@YAHOO.COM> wrote:

>The 4.57 R&P that is sometimes available here is only a change of about 6% >and they are at least 600 for the part, when you can find them. The >taller gears are about 240 each, and the .77 gives you a 10% change in >ratios, and the .70 is 20% taller. Much better bang for the buck.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.