Date: Mon, 27 Feb 2006 21:56:39 -0500
Reply-To: Mike Collum <collum@VERIZON.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Mike Collum <collum@VERIZON.NET>
Subject: Re: Touching up the stove cabinet front?
In-Reply-To: <823d60d39e742a7aa22a5a2b131e1143@knology.net>
Content-type: text/plain; charset=ISO-8859-1; format=flowed
This is just one of many sites you could check out for making decals
using your inkjet printer.
http://www.mcgpaper.com/decals.html
This is the first one that I went to using a google search for printer
decal.
Mike
Jim Felder wrote:
> That lettering is screen printed, not a decal. Getting them done is not
> a problem as long as you've got a number of them to print. printing one
> wouldn't be worth the cost, probably. Being recessed in the steel
> channel like that would require a knowledgeable printer to pull it off,
> but it could be done.
>
> The lettering is really too small to use vinyl lettering. Screen
> printing is the only way out, unless, of course, you had your own
> decals printed, which is again a screen print process.
>
> If anyone wants to work this out can get some done, say at least 10,
> email me.
>
> Jim
>
> On Feb 27, 2006, at 8:22 PM, Kevin wrote:
>
>> Sorry if this has already been asked, but does anyone know if the
>> decals are
>> available anywhere? Would there be any interest in getting them made
>> if they
>> are not?
>>
>> Kevin
>>
>>
>> -----Original Message-----
>> From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
>> Of
>> JordanVw@AOL.COM
>> Sent: Monday, February 27, 2006 10:27 AM
>> To: vanagon@GERRY.VANAGON.COM
>> Subject: Re: Touching up the stove cabinet front?
>>
>>
>> In a message dated 2/26/06 8:33:37 PM Eastern Standard Time,
>> gezapolony@SBCGLOBAL.NET writes:
>>
>>
>>> I was thinking it might be easier to find the plate at a boneyard and
>>> just
>>> replace it. Sounds like a PITA to paint.
>>>
>>
>> good luck finding someone parting out a 87 up westy (most are still
>> on the
>> road) and even better luck finding a un-faded kitchen LED display
>> panel
>> (every
>> one ive seen is faded to brownish grey w/ some rust on it)
>>
>>
>> just mask it off and spraypaint it.
>>
>> chris
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.375 / Virus Database: 268.1.0/269 - Release Date:
>> 2/24/2006
>>
>> --
>> No virus found in this outgoing message.
>> Checked by AVG Free Edition.
>> Version: 7.1.375 / Virus Database: 268.1.0/269 - Release Date:
>> 2/24/2006
>>
>
|