http://www.tooldesk.com/products/productDetail.aspx+id+81
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of J Roth Sent: Wednesday, March 01, 2006 8:54 PM To: vanagon@GERRY.VANAGON.COM Subject: Drive flange at transaxle Hey: I've been working at replacing the drive seal that began leaking last week on the transmission that has now 340K with Redline fluid. My problem lies in removing the drive flange - Daryl @ AA Transaxle has given some GREAT insight which included using 2 crowbars to pull the drive flange out. Unfortunately this has only resulted in flattening the screws that hold the plastic retainer while leaving the drive flange in place. Before anyone asks, I've removed the circlip and washer... Any other suggestions? In "V"anagon "W"esty love, light & laughter, J '87 Westy (Missouri) leaking tranny @ 340K miles
-- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.1.1/271 - Release Date: 02/28/2006 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.