this is turning into the job that never ends. I finally have everything I need, but I think I'm short on grease. The 80g packets that come with the boot kits are already short of the 90g bentley recommends per joint, and I used some of the grease to get the boots on the shaft. I'm also planning on messing up. So I need some more grease. Trouble is, no vw dealers in my area of the grease in stock (o their parts departments are closed today). Is there any chance of finding the correct grease at a FLAPS? What exactly should I be looking for? Thanks for any tips, Wes
Wesley Pegden wrote: > Okay, I'm pretty sure I've done this right. If you look at Tom's > website about the cv joints: http://volksweb.relitech.com/cvjoints.htm > he has pictures in Step 4 of the "Front" and "Back" of the CV joints. > You can see the difference between the front and back of the inner > race. One has a raised circle, the other is totally flat. My "fronts" > face the flange they're being bolted to. In the case of my joints, that > means the group of 3 lines in a row faces the flange, and the single > groove (which is concealed by metal base of the boot when installed on > the shaft is towards the axle. > > -Wes > > > Dennis Haynes wrote: >> The outside will have a line on it. The line faces the flange it is >> being bolted to. >> >> Dennis >> >> -----Original Message----- >> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf >> Of Wesley Pegden >> Sent: Friday, March 10, 2006 7:28 PM >> To: vanagon@GERRY.VANAGON.COM >> Subject: Re: (rear) cv joint (again...) >> >> Hopefully this is my last question: >> The lobro cv joints have two sides: on one side, the inner race is >> totally flat. On the other, the inner race has an inner circle that >> sticks out past the rest. Which side should face away from the axle? >> >> Thanks, >> Wes >> >> >> >> > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.