Hi all got a question on parts swapping. to know if the parts will fit from 1.9L to 2.1L. a simple yes or know is fine. 1) cam 2) cam bearings (type 1 or 4) to 1.9L 3) Rod bearings on 1.9L to 2.1L are the same as type 1 4) Crank 2.1L in 1.9L case? 5) main bearings 6) Lifters 7) Rods 8) heads 9) case 10) 1.9L P&Cs to 2.1L P&Cs and vise versa will they fit 2.1L to 1.9L 11) pushrods 12) oil pump i believe is same for all except type four and early type 1 13) flywheel 14) oil filters Just wondering. Ive got 5 - 1.9L motors and 1 - 2.1L motor. 2 - 1.9L are running in vanagons, 2 - 1.9L and 1 - 2.1L are appart and one Long block 1.9L just sitting around ready to take apart. all had various issues some stupid issues and pulled for no real good reason. Im going to build up the 2 - 1.9L motors. 1 is a short block already and the other is ready to have the crank dropped in. all in good fun. thanks Jonce Jonce Fancher 57 Single Cab 66 Sunroof Bug 66 Variant Squareback 71 Sunroof Bus 75 911S Sunroof 84 Vanagon "Godfried" 85 Vanagon Westi 2003 10 Passenger Sprinter Fancher's Upholstery Inc. - www.fanchers.com Not-A-VW Club- http://mywebpages.comcast.net/jaransont3/notavwclub/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.