Date:         Sun, 12 Mar 2006 22:30:39 +1300
Reply-To:     Andrew Grebneff <andrew.grebneff@STONEBOW.OTAGO.AC.NZ>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Andrew Grebneff <andrew.grebneff@STONEBOW.OTAGO.AC.NZ>
Subject:      Re: Satisfaction Plus,
              & Installation Ease Of Stainless Coolant Pipes.
In-Reply-To:  <BAY5-DAV9CAB82FAD1F15181318F5B1E30@phx.gbl>
Content-type: text/plain; format=flowed; charset=us-ascii

>  > Please tell us:
>>
>>  -how much of the original plumbing the kit replaces
>All of it Andrew.
>From the radiator hoses to the coolant T in the rear of the van.
>
>  -what sort of/how many connectors there are and where they are
>>  I chose to use the two pice pipes.
>I do not have acess to a lift and this was the easiest as it didn't require
>the use of a lift to get the single length pipes above the fuel tank.
>The connection where the two pipes went together is silicone hose, and I
>used new to me double stainless silicone hose clamps at each connection.
>They do not pinch the hose at all.
>There are two bands within each clamp to prevent this from cutting the hose
>as it is tightened down.
>
>-price.
>
>$415.00 plus $59.00 shipping
>
>There is no welding of the pipes I have in the Van.
>They are bent to fit as the old plastic pipes did.
>
>Have a nice evening,
>Ron

Thanks! Sounds good. I'll keep it in mind in case my stainless
diameter proves to be less than ideal (too small or large). I can
ship it over cheaply from LA.
--
Regards
Andrew