Nothing goes into that tiny fuel test port. The outside is sized for a hose. -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Roger Sisler Sent: Wednesday, March 15, 2006 6:45 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: 1.9 runs better with 02 sensor disconnected-kinda long cause I need to ventialte Ok, anyone know if one of the gauges from my A/C manifold gauge set can be adapted to the fuel pressure testing port? These gauges measure up to 150psi (low pressure gauge). I understand that adapters are normal for gauges to be hooked up, most times. What is usually used in that tiny fuel port. If I can get something in there ,it will probably have metric threads. My gauge is english threads.Any help on how I can test for high fuel pressure? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.