Date:         Thu, 16 Mar 2006 17:39:13 -0500
Reply-To:     Wesley Pegden <wes@CS.UCHICAGO.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Wesley Pegden <wes@CS.UCHICAGO.EDU>
Subject:      sway bar wiggling
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I've been trying to diagnose a popping noise that happens when going
over big bumps, that seems to be coming from the front of the van, maybe
from the passenger side.  I went under the front today (again), and
notice that I can wiggle the stabilizer bar back and forth just slight.
Is this normal?  Also, I noticed that while the end of the stabilizer
bar is flush with the stabilizer link bushing on the driver side, it
sticks through the bushing a good 3/4 of an inch on the passenger side.
Is this normal?  Could this be related to my problem?

Thanks,
Wes

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.