We've noticed! On 3/28/06, BenT Syncro <syncro@gmail.com> wrote: > > On 3/28/06, Jake de Villiers <crescentbeachguitar@gmail.com> wrote: > > Are you sure about the center holes Evan? I thought that was just the > Audi/ > > Passat rims, since my Mercedes wheels fit the hubs quite nicely. > > > > On 3/27/06, Evan Mac Donald <macdonald1987@sbcglobal.net> wrote: > > > > > > The wheels SHOULD fit the Doka without mods or spacers, but they will > need > > > the center diameters opened up to 2 1/4 or 3/8", and 10mm spacers for > the > > > front of a 2WD. You will have clearance problems at the upper control > arm, > > > if you try to omit the spacer. > > > The wheels will need longer bolts and studs in either use. > > > > > Jake, > > I believe Evan is mistaken regarding the centerbore. I have yet to > find a Mercedes wheel which had a centerbore which is too small for a > Vanagon. That's saying a lot considering I am a good candidate for > WWMFAVA (Wheels Which May Fit A Vanagon Anonymous). My spare wheel > collection exceeds 160. > > BenT >
-- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" www.crescentbeachguitar.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.