Are you sure about the center holes Evan? I thought that was just the Audi/ Passat rims, since my Mercedes wheels fit the hubs quite nicely. On 3/27/06, Evan Mac Donald <macdonald1987@sbcglobal.net> wrote: > > The wheels SHOULD fit the Doka without mods or spacers, but they will need > the center diameters opened up to 2 1/4 or 3/8", and 10mm spacers for the > front of a 2WD. You will have clearance problems at the upper control arm, > if you try to omit the spacer. > The wheels will need longer bolts and studs in either use. > > mario m <vw_fool@HOTMAIL.COM> wrote: > This weekend I picked up a set of ronal r-9's at the junkyard from a > Mercedes. They are 15x7 with a 35ET, the lug holes are 14mm. and the bolt > pattern is the same as a vanagon (I put a rim on a vanagon rear for > verification). Will this rim fit either a 2wd Vanagon or syncro Doka without > spacers. I have checked the archives and have found all kinds of conflicting > answers on the subject of ET. > > Mario > > > > Evan Mac Donald > > 1984 Wolfburg > 1985 GL 7 Pass. > 1991 Carat Weekender > 1972 Chevy P/U > 1993 Bonneville >
-- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" www.crescentbeachguitar.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.