Date:         Mon, 27 Mar 2006 09:23:43 -0800
Reply-To:     mark drillock <drillock@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mark drillock <drillock@EARTHLINK.NET>
Subject:      Re: Sink P-trap replacement
In-Reply-To:  <44281C5C.5000901@verizon.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Yes, they sell a similar tool in the plumbing section of most larger
hardware stores. It is a standard item for working on sinks and bathtubs
and does not cost much.

Mark

Mike Collum wrote:

> I haven't tackled the Westy sink but I made a drain tool for use on a
> bathtub that had "Crosshairs" by notching a piece of pipe that inserted
> from above.  I could then keep it from turning with a small pipe wrench.
>
> Mike
>

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.