On 3/30/06, Larry Alofs <lalofs@rcn.com> wrote: > > This is a very common symptom. Usually caused by the ignition switch > circuit not supplying enough current to activate the solenoid. > The starter itself is usually OK. A *hard start relay kit* often > solves the problem.
Is it not a better idea to address whatever deficiency is in the starting circuit? Is the circuit so marginally designed that what should be an inconsequential loss of conductivity is enough to keep the starter solenoid from tripping? I understand the loaf and splittie buses (6v in particular!) had issues with this, particularly with the battery being all the way in the back, effectively making the ignition circuit nearly twice the length of the vehicle; but was the Vanagon still the same way? -- John Bange '90 Vanagon - "Geldsauger" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.