I bought what I thought was the wiring harness for the ECU for an 88 Westy. Instead what I got was the harness that goes between the fuel pump/ECU relay box and the black box that is in the engine bay. It also has the plug for the coolant level sensor on it, plug for the oil pressure sensor on it, plug for the coolant temp sensor (gauge), and a couple of the wires that go to the coil. It ends in a round plug that goes inside the black box on the firewall. It is a brand new VW part and one of the last in the country. I only want what I paid for it which is $250. It lists for $312. If you want the part number it is 251971071DS. If you are interested please email or call me. Thanks, Ken Wilford John 3:16 http://www.vanagain.com http://www.strictlyvwauctions.com http://www.eurovan.org http://www.vwcabrio.org Phone: (856)-327-4936 Fax: (856)-327-2242 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.