Date:         Tue, 9 Feb 2016 12:14:42 -0500
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Parts Washer
Comments: To: adam butler <acbutler.dandy@ICLOUD.COM>
In-Reply-To:  <cafb2d33-61d2-4add-b4cd-eecdb600f8b5@me.com>
Content-Type: text/plain; charset="US-ASCII"

There are a few things you need to consider. What is compatible with the
pump and other materials in that system, what you intend to clean,
flammability, and how you will get rid of the waste which may be considered
hazardous waste. There are a number of petroleum and water based solvents
available. Most water based solutions work best heated. These solvents have
worked well for me over the years.

http://www.mcmaster.com/#cleaning-solvents/=111v3be

The one with lanoline is a bit easier on the hands.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
adam butler
Sent: Friday, February 5, 2016 7:16 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Parts Washer

I got a new 40 gallon Parts Washer, what would be the best solvent to fill
it with? Thanks

Adam